T862 IRDA Welder Infrared SMT SMD BGA Rework Station

T862 IRDA Welder Infrared SMT SMD BGA Rework Station

ราคา 10,000 บาท

It can reflow any laptop video chip,XBOX360,motherboards ,PSP PS2 ,video card, mobile phone ,cell phone

Feature :
 ※ Unlike Air Re-Work systems, The T-862 uses an Infrared source and optics to target heat to individual components without dislodging other SMT parts by way of eddies air currents.

 ※ Infrared soldering technology with independent exploration capabilities via the focus lenses which is included in the package.

 ※ Technician focused infrared heat is easy to target most component removal/replacement and re-work.

 ※ The Workstation has a 80 X120mm a 600W controlled Pre-heating System.

 ※ Infrared heat source bulbs are long-lived, in-expensive and easily replaced.

 ※ Processor controlled set-point regulated temperatures with thermocouple feed-back.

 ※ Integrated and adjustable Infrared (IR) eye protection.

 ※ Can suitable for the entire component, especially Micro BGA component.

 ※ The T-862 system also contains a temperature controlled touch-up iron and stand.

 ※ Extra soldering tools are not necessary to solder/unsolder and re-work Surface Mount Technology (SMT) components18*18cm in size

 ※ Training is illustrated in factory provided video
　
　
Technical parameter :
Working Voltage : AC220V/50Hz
AC110V/60Hz
Output power : 600W
Infra-red lamp body temperature adjustable :100℃-350℃
Preheating dish temperature adjustable :60℃-200℃
　
Components :

T-862 Chassis : 1 x
PCB Board holder : 1 x
936 Searing-iron : 1x
936 searing-iron rack :1x
Lamp Body and Lens(D=28mm) :1 x
Eye protection(IR Filter) : 1 x
Cell guide :1 x
Focus holder : 1 x
Focus holder control knob :1 x
Fasten nut for focus holder :1 x
Steady ring :1 x
Fasten nut for steady ring :1 x
Power Cable (110VAC or 200VAC) : 1 x
5mm Fuse, 10A 250VAC (Spare) : 1 x
CD User Manual w/Video : 1 x
Detailed English instructions and illustrations : 1 x
More information, please donot hesitate to contact us.
　
Maintenance:
 At all times – Insure the light body cooling fan is unobstructed and clean.

 Use a little machine oil. Lubricate the focus holder and cell guide to inhibit rusting, keep them ease to operate.


Warning :
The T-862 System creates temperatures in excess of high degrees via Infrared Light. Wear appropriate eye protection or any device within The T-862 system when using this machine. After use, Do not cut the power immediately, confirm the light body is cool-to-touch, Turn off the power switch, then place the system in airiness & safety storage.

Do NOT use this system or any associated device in an environment conducive to fire or electrical overload.

Disconnect the AC Power Plug when not in use.


E Mail: jeab_25252816@hotmail.co.th , kss2002@hotmail.com เคี้ยงหลีพลาซ่า A1 บ้านหม้อ เบอร์โทรศัพท์ 082-4982881, 089-4080213